CAT .5e UTP patch panel Implementation standards: YD/T 926.3, ISO/IEC 11801, ANSI/TIA-568.2-D. Support voice communication system, 10BASE-T, 16Mbps, 100BASE-T, 155Mbps and 622 Mbps ATM, 1000 Mbps, multimedia and other high-speed applications.
Implementation standards: YD/T 926.3, ISO/IEC 11801, ANSI/TIA-568.2-D
Installation requirements: Integrated 19-inch installation
Iron plate material: cold rolled plate
Thickness: 1.6mm
The fire rating of the plastic material conforms to UL 94V-0 standard
A cable tray is installed on the back to secure the cable, preventing the cable from falling off due to external forces
Wiring mode: 180 degrees
IDC card cable gauge: Supports 22-24AWG solid or multiple twisted pair cables
Line sequence: T568A and T568B line sequence color codes are supported
Gold needle: Gold plated 50μm
Supports 100MHZ bandwidth
Insertion and removal times: ≥1000 times
Wire termination times: ≥200 times
Insertion force: insertion force ≤20N, extraction force ≥20N
Insulation impedance: 500MΩ
DC current: 1.5A
Contact impedance: 20mΩ
Operating temperature: -40°C ~ 70°C
